Skip to main content
Version: 6.13

OpenEye Setup

Patriot can receive alarms from DVRs/NVRs and network cameras registered on the OpenEye Cloud Video Platform providing seamless support for alarm event and video monitoring.

Prerequisites​

  • This feature requires the OpenEye module added to your license.

  • Configure your OpenEye account with the connected DVRs/NVRs and network cameras. Refer to the OpenEye manual and support resources for setup instructions.

  • Download the OpenEye Client Files.

  • Extract the OpenEye Client Files and place the whole OpenEye folder into the Camera Viewer Client installation folder of each workstation that will view the OpenEye CCTV. By default the folder structure normally reads:

    C:\Program Files (x86)\Patriot Systems\Patriot Version 6 Client\CameraViewer\x64\OpenEye\

See also​

DVR Monitoring

Patriot Client Setup​

Apex Server Setup​

You will need to set the Integration ID for each camera you are going to view from Patriot.

In the Apex Server management portal, go to General Configuration > Cameras. Select a camera and set the Integration ID in the General tab. Each camera needs an unique Integration ID within the scope of the Apex Server (Recorder). The Integration ID needs to match the zone number assigned to the camera zone in Patriot.

Set Apex Server Camera Integration ID
Set Apex Server Camera Integration ID

Patriot Setup​

Client Zone Settings for OpenEye
Client Zone Settings for OpenEye
  1. Switch to the Zones Tab of a client.
  2. Set the Camera Type option to OpenEye.
  3. Choose the Camera Stream type used for streaming. It applies to all camera feeds including live and playback.
  4. Find Recorder Device ID of the Apex Server from the OpenEye Cloud Video Platform by going to Management tab, selecting an Apex Server and locating the Recorder Device ID in General Information. Enter the Recorder Device ID into Device ID field in Patriot.
Apex Server Device ID
Apex Server Device ID
  1. Override the Event Reporting setting if different to the task setting.
  2. Choose the Task used for event reporting. Patriot client will also load the login details from the task settings. A multi-area client must choose the same task if camera is setup on multiple areas.
  3. Select or insert a zone which will have a camera associated with it. Set the zone number to match the Integration ID of the camera. Then check Camera Enabled in Cameras tab of the zone.

Task Setup​

OpenEye Platform Setup​

On OpenEye Cloud Video Platform, go to Management > Integrations. Add a new Integration of Alert Feed.

Add Alert Feed Integration
Add Alert Feed Integration

Make sure Enable Alert Feed Integration option is checked in General Settings of the Alert Feed integration.

Enable Alert Feed Integration
Enable Alert Feed Integration

In Alert Feed tab, make sure HTTPS Alert Feed has a name so that it can be added to your Alert Rules later.

Name HTTPS Alert Feed
Name HTTPS Alert Feed

Go to Alerts > Alert Rules from the top menu. Select the alert rule or add a new rule with the alert type you want to monitor, for example Motion. In the Rule Definition tab, enable the option to send to the HTTPS Alert Feed you just named.

Send to HTTPS Alert Feed
Send to HTTPS Alert Feed

Patriot Task Setup​

System Menu Item > Tasks > Task Settings

Create a new task with OpenEye as the task type.

Please read Task Settings for general information about task configuration.

OpenEye Task Settings
OpenEye Task Settings

Cloud Url is the address of the OpenEye OWS server. Default is https://gp4f.com or https://ows.openeye.net

Company Id is your OpenEye account Company (Tenant) Id and can be found in your OpenEye Account Profile labelled as Account Alias.

STUN Server is the hostname of a STUN server to use for peer to peer connections. Note that if P2P is not enabled or not functioning properly you can remove the STUN value and leave it blank which will allow Patriot to connect to the device and stream over Relay instead of P2P.

Username and Password for logging into your OpenEye cloud service account.

Installing the OpenEye event template​

You can download the OpenEye event types template here or from the Receivers And Format Templates page.

For instructions on how to import this template, see How To Import Templates.

Trouble Shooting​

There is a new configuration setting called EnableOpenEyeSdkLog in Patriot.Client.CameraViewer.x64.exe.config file which can be found in your Patriot client installation folder Patriot Version 6 Client\CameraViewer\x64. The setting is located in <Patriot.Client.CameraViewer.x64.Properties.Settings> section. It reads:

<setting name="EnableOpenEyeSdkLog" serializeAs="String">
    <value>False</value>
</setting>

By setting the value to True, Patriot client will allow OpenEye SDK to write logs into a local file for trouble shooting purpose. The log files can be found at C:\Users\[username]\AppData\Local\Patriot Systems\Patriot Version 6 Client\Logs on Windows 10/11, with filenames "CameraViewer-XXXXXXXX.log".

note

To enable SDK log may increase the camera loading time. It is recommended to only enable it for trouble shooting, and disable again once trouble shooting is done.