| Concept 3k/4k | Ademco IP | | |
| ICT PostX | ICT LS30 | | If your PostX modules are running firmware prior to [App Version 1.04 b 407 r 8160] you should select the ICT(LS30) task, otherwise choose ICT(ArmorIP) |
| Protege | ICT Receiver | | Protege panel are supported through an ICT receiver. |
| Selocom GPRS | CSV IP | | Needs to use firmware with CSV IP support enabled. |
| Ksenia Lares | SIA DC09 | | |
| Evacom GPRS / IP | Surgard IP | | requires Evacom software run at central station end |
| Vanderbilt | Surgard IP | | Vanderbilt supply software receiver which emulates a Surgard Receiver. Siemens Task shouldn't be used as it isn't complete and is no longer supported. |
| Satel Integra and Perfecta | SIA DC09 | | Compatible panels, Perfecta and Integra have been tested, can send signals direct to Patriot using SIA DC09. No service or software required. |
| Crow Shepherd | SIA DC09 | | Can send signals direct to Patriot using SIA DC09. No service or software required. Sends through URLs that can show in Standard Media Module and when clicked will download the verification image. |
| Arrowhead | Arrowhead IP | | Devices configured to report in Patriot LS30 mode. |
| Arrowhead | Armor IP | | Devices configured to report in Armor IP mode. Note: encryption not supported. |
| AJAX | System Technologies / SIA DC09 | | System Technologies Task can support Ajax with URLs that can show in Standard Media Module and when clicked will download the verification image. This option requires signals reporting through Ajax Cloud, and also configuring the Ajax Translator to be set to use "Patriot Systems" format.
There is also an option of sending signals direct to Patriot using SIA DC09. No service or software required. This option does not appear to support video verification. |
| Hikvision AXPro | SIA DC09 | | Can send signals direct to Patriot using SIA DC09. Sends through URLs that can show in Standard Media Module and when clicked will download the verification image. |